Element T-03
Low Pressure Polyethylene
For large diameter pipes and operating temperatures up to +80
Application
Anti-corrosion coating
Characteristics
Color black Polyethylene for VUS PND Improved characteristics Hardness according to SHOR D is more than 60
Pipe compounds

Description

Element T-03 is a composite material for factory application of polyethylene coating of pipes with improved physical and mechanical properties, increased resistance to cracking, impact and ultraviolet radiation, produced according to TU 20.16.10–002-88028259-2024

Application

Element T-03 is designed to apply an anti-corrosion coating to large-diameter steel pipes by extrusion. Element T-03 is characterized by resistance to thermal-oxidative aging during processing and operation, as well as to photo-oxidative aging during operation. It is used for large-diameter pipes and operating temperatures up to +80 degrees Celsius.

Download passport Download TU Order a sample

Characteristics

Name
 of the indicator
Units of measurement Standard Test results Test method
1 Density g/cm3 0.935-0.950 0.940 GOST 15139
2 Melt flow index g/10 min, at a load of 2.16 kg 0.3-0.8 0.45 GOST 11645
3 Melt flow index spread %, no more than 10 8 GOST 16338
4 Mass fraction of volatile substances % 0.07 0.06 GOST 26359
5 Resistance to cracking under stress h, not less than 1000 corresponds to GOST 13518
6 Tensile yield strength. MPa, not less than 15 19.1 GOST 11262
7 Tensile strength MPa, not less than 22 23.4 GOST 11262
8 Relative elongation at break* %, not less than 800 1400 GOST 11262
9 Vicat softening point оС, not less than 120 126 GOST 15088
10 Resistance to stress cracking h, not less than 1000 corresponds to GOST 13518
11 Color black black

Recommendations for recycling

Element T-03 is processed by extrusion. The material is technologically feasible in the range from 150 to 240°C.
Material Recycling Guidelines
Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Clamp Head 1 Head 2
160 170 180 190 200 200 210 210
If necessary, the temperature regime can be changed by ±20 ℃ in each zone of the extruder until it reaches.
Maximum material processing temperature is 240 degrees

Package

The composition is packed in laminated polypropylene or polyethylene bags of 25±0.2 kg, the material can also be packed in a big bag with a polyethylene liner of 1000 kg.

Storage conditions

The guaranteed shelf life is 8 years from the date of manufacture, provided that the product is stored in closed areas, excluding direct sunlight, at a distance of at least 1 m from heating devices.

View all documents

Contact us

Перейти в чат

Telegram chat with a technologist

Get advice from a competent technologist of our company on all questions of interest to you.

+7(343)298-99-08
info@elementa-group.ru

Are you interested in:

тяни